Lighting is one of the categories where the current tariff era can stack up, because decorative and household fixtures are often produced in a relatively concentrated set of overseas factories, and a base duty that was once minor may now sit underneath a heavier country-specific load. The category is also bulky and low-margin per unit, so freight and duty tend to move together, and even a few points of added duty can flip a fixture from profitable to underwater. Lighting SKUs are also easy to misclassify, and the wrong code can attach a meaningfully different rate to a product you have been selling for years.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Pakistan ships to the United States as a normal-trade-relations partner, but it has no free trade agreement with the U.S. and is not currently covered by a U.S. preference program such as GSP, so its goods generally carry standard MFN duties plus the reciprocal-era tariff load applied broadly in the current trade environment. Pakistan is a textiles-heavy origin: cotton apparel, home textiles, towels, and bed linens make up much of what it sends here, and those categories tend to sit among the higher base HTS duty lines before any reciprocal load stacks on top. The combined effect is what matters for landed cost — the duty applies to your customs value on every shipment, so a meaningful add-on can quietly turn a healthy SKU margin negative. The representative stacked rate for your category is in the rate box above; treat it as a directional estimate, since your exact duty depends on the precise HS classification of your specific product.
Pakistan can be a real China alternative for textiles and a handful of leather and surgical-instrument lines, but it is not a tariff loophole — it generally carries its own reciprocal-era load, so the win tends to come from diversification and competitive factory pricing rather than from avoiding duty. The honest read: Pakistan's edge is its cotton supply chain — it is a major cotton grower and runs vertically integrated mills — which can offset part of the tariff at the unit-cost level, but that strength is fairly narrow. Outside textiles, leather goods, and sporting/surgical goods, the supplier base tends to thin out, and lead times, freight routing, and quality consistency can be less predictable than China or Vietnam. The point most merchants miss is rules of origin: simply finishing or relabeling a China-made input in Pakistan does not necessarily make it a Pakistani-origin product for duty purposes, and if substantial transformation does not occur, CBP may treat it as Chinese origin and assess it accordingly, potentially with penalties. As a general approach, source there for genuinely Pakistan-made cotton and textile products where the cost advantage is structural, model the landed cost with the stacked rate baked in before you commit, and keep a second origin qualified so a tariff or policy shift on one country can't strand your whole catalog. Confirm origin treatment and classification with a licensed customs broker before you rely on it.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Pakistan tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $45 lamp from Pakistan at a 14% stacked rate, that means charging $41.04 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
The core of lighting classification is HTS heading 9405, which covers luminaires and lighting fittings (lamps, ceiling and wall fixtures, string lights, and their parts) regardless of the light source. The base duty for many finished fixtures is relatively modest, but the rate that actually hits your landed cost tends to be driven by three attributes: the material of the fixture body (a brass or glass lamp may sit at a different subheading than a plastic one), whether the item is a complete fixture versus a part such as a shade or base, and the country of origin, which is what can pull in the heavier current-era load. Light sources themselves can fall outside the heading, which is one place rate surprises tend to come from. The exact per-SKU duty depends on the precise HS code, so two products that look identical on your storefront can carry different rates.
A common lighting pitfall is the LED line: an LED bulb or retrofit lamp is often classified outside the 9405 fixture heading (an electric lamp can fall under a different heading entirely), and an integrated LED module or driver may be pulled toward yet another heading. Merchants who file an entire lighting catalog under one 9405 code because everything ships as a 'lamp' can end up applying the wrong duty to their LED-source items, and because LED products are a growing share of many stores, that single misread can distort the margin on high-volume SKUs. When the bulb and the fixture ship together as one sellable unit, the classification can hinge on which component gives the article its essential character, so it is worth confirming the code per SKU rather than per category.
Lighting assembly is relatively mobile, which can make origin shifting more realistic here than in categories with concentrated raw-material supply, and some Southeast Asian countries already run fixture assembly lines that may change the country-specific load on your landed cost. The catch is that origin for duty purposes generally follows where substantial transformation happens, not where the box ships from, so moving final assembly while still importing the metalwork, glass, and electronics from a high-load origin may not move your rate the way you expect; that analysis is fact-specific. Before committing to a supplier change, price the same fixture against a few candidate origins and confirm the classification holds, since a heavy glass or metal fixture also carries freight cost that can erase a duty saving. This is general guidance, not a customs ruling, and the defensible answer for any specific SKU comes from its actual HS code and origin documentation.
Do string lights and seasonal fairy lights fall under the same heading as a table lamp?
Decorative lighting sets, including string and fairy lights, are generally captured within heading 9405 as lighting fittings, so they typically share the fixture base duty rather than a bulb rate. That said, battery-powered or novelty sets can fall under a different subheading depending on construction, and the country-specific load still applies on top. Confirm the exact code per product, because seasonal SKUs are often imported in bulk and a small rate difference can add up at volume.
Are replacement lampshades and fixture parts dutied differently from a complete lamp?
Parts of lighting fittings, such as standalone shades, bases, and arms, have their own provisions within the 9405 structure and can carry a different rate than the finished fixture they belong to. If you import components and assemble or kit them domestically, you may be classifying the parts rather than the complete lamp, which can change the duty and sometimes the country-of-origin analysis. It is worth treating parts SKUs as their own line in your costing rather than assuming they inherit the finished-fixture rate, and confirming the code per SKU.
My fixtures ship with the bulbs included. Does that change the tariff?
It can. When a fixture and its light source are imported together as one packaged article, classification may turn on which part gives the item its essential character, and an integrated-LED fixture can be treated differently than a traditional lamp sold with a separate replaceable bulb. Because the bulb side may pull in a code outside the 9405 fixture heading, a bundled product can land at a different rate than the bare fixture would. Check the combined article's code rather than assuming it follows the fixture alone.
Does the U.S. have a trade deal with Pakistan that lowers tariffs?
No. Pakistan trades with the U.S. on normal-trade-relations (MFN) terms, has no free trade agreement, and is not currently benefiting from a U.S. preference program such as GSP, so there is generally no preferential program to reduce your duty. Your imports typically pay the standard HTS rate for the product plus the reciprocal-era load in effect, which is why the stacked rate matters. Qualifying for any future preference would still depend on rules of origin, not just shipping from Pakistan. This is general guidance, not customs advice.
Is Pakistan cheaper than China once tariffs are included?
Sometimes, and mainly for cotton-based textiles. Pakistan's vertically integrated cotton and mill base can deliver a low enough unit cost that the total landed cost beats China for apparel, towels, and bed linens even after both origins carry a reciprocal-era load. For non-textile categories the supplier depth and cost advantage are often weaker, so run the actual landed-cost math per SKU with the stacked rate from the rate box rather than assuming Pakistan always wins. This is general guidance, not customs advice.
If my supplier uses Chinese fabric or components, what origin do I declare?
Origin generally turns on where the product is substantially transformed, not where it ships from. If a Pakistani factory does enough manufacturing — for example, spinning, weaving, and cutting-and-sewing a garment — the product is typically treated as Pakistani origin; if it merely finishes or relabels an essentially China-made item, CBP may treat it as Chinese origin and assess the corresponding rate. Have your factory document the production steps and the source of major inputs, and confirm the classification, because a wrong origin call can expose you to back duties and penalties. Verify specifics with a licensed customs broker.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →